Satellite to 3D
Satellite to 3D maps, in minutes.
Satellite to 3D means turning overhead satellite imagery into a three-dimensional map of terrain and structures. SpatialGen VPS converts 10 km² of commercial, government, or your own satellite imagery into a 3D map in 10 minutes.2 No aircraft has to fly the area first, and drones then fly that map with no GPS.
Last updated
Why satellite to 3D matters for mission planning
Flat imagery shows where things are. A 3D map shows what stands between you and them: every street, every ridgeline, every building a route has to clear. For planners and operators, that difference decides whether a route can be flown, and whether a drone can recognize where it is when it gets there.
Most 3D mapping starts with a drone: fly a pattern over the area, collect overlapping photos, and process them with photogrammetry. That works once an aircraft can reach the area. Satellite to 3D removes that first step. The 3D map exists before the first drone launches, including for places no friendly aircraft has flown.
3D terrain mapping has also historically been slow. The US Army's One World Terrain took 3 hours to generate 1 km² (Army, 2019).2 SpatialGen builds a 3D map from satellite imagery fast enough to work from current imagery, and ISR drones enhance the same map.
Three ways to get a 3D map of an area
| Approach | Source data | Aircraft over the area first? | Coverage |
|---|---|---|---|
| Satellite to 3D (SpatialGen VPS) | Satellite imagery: commercial, government, or your own | No | Anywhere satellite imagery exists; live ISR drone video is added to the same map |
| Drone photogrammetry | Overlapping photos or video from a drone flight | Yes | Only what the drone has flown, and only where it can reach the airspace |
| Pre-built terrain databases | Elevation and 3D data collected and processed in advance | No | Where data was collected in advance, as the area was at that time |
How it works
- 01
Start with satellite imagery
Use commercial, government, or your own satellite imagery. Any satellite works, and the 3D map benchmark was validated with Satellogic imagery.2
- 02
Generate the 3D map
SpatialGen reconstructs the area in 3D: every street, every ridgeline. 10 km² of satellite imagery becomes a 3D map in 10 minutes.2
- 03
Fuse live ISR
Live drone video lands on the same 3D map, automatically. ISR and satellite imagery become one map instead of two feeds.
- 04
Put it to work in TAK
The map is formatted for ATAK and iTAK. Pick a start and an end in ATAK and SpatialGen generates 3D routes around obstacles for review.
Performance
- 10 km² of satellite imagery to 3D.2
- 10 min
- NVIDIA Jetson Orin. Or any edge computer.
- 1
- 2Validated with Satellogic imagery. The US Army's One World Terrain took 3 hours to generate 1 km² (Army, 2019).
Terms
- Photogrammetry
- Reconstructing 3D shape from overlapping photographs of the same area taken from different positions.
- Digital surface model (DSM)
- An elevation grid that includes buildings and vegetation, as opposed to a bare-earth terrain model.
- 3D Tiles
- An open format for streaming large 3D models at multiple levels of detail. ATAK can draw 3D Tiles, which is how city-scale models reach TAK users.
Questions
What does satellite to 3D mean?
Satellite to 3D is the conversion of overhead satellite imagery into a three-dimensional model of terrain and structures. Instead of a flat picture, you get a 3D map with the height of buildings and the shape of the ground. That map can be used for route planning, situational awareness, and navigation by drones that fly without GPS.
Can you build a 3D map without flying a drone?
Yes. SpatialGen VPS builds the 3D map from satellite imagery alone, so no aircraft has to fly the area first. That matters when the area is denied, distant, or simply has not been flown yet. When ISR drones do arrive, their live video lands on the same 3D map and enhances it.
How is satellite to 3D different from drone photogrammetry?
Drone photogrammetry reconstructs 3D from overlapping photos collected by flying a drone over the area, so the map covers only what has been flown. Satellite to 3D starts from overhead imagery that already exists or can be tasked, so it covers wide areas before any flight. The two are complementary: SpatialGen adds live drone video to the satellite-derived map.
How long does it take to make a 3D map from satellite imagery?
SpatialGen VPS turns 10 km² of satellite imagery into a 3D map in 10 minutes, validated with Satellogic imagery. For comparison, the US Army's One World Terrain took 3 hours to generate 1 km² in 2019.2 Speed matters because a map built from current imagery reflects the area as it is now.
Which satellite imagery does SpatialGen support?
Any satellite. SpatialGen VPS works with commercial imagery, government imagery, or imagery your organization already owns. Satellogic is a SpatialGen technology partner for satellite imagery, and the 10-minute benchmark was validated with Satellogic data.2 Live ISR drone video can be added to the same 3D map automatically.
How is the 3D map used once it is built?
The map is formatted for ATAK and iTAK, so operators see it in the tools they already carry. In ATAK, pick a start and an end and SpatialGen generates 3D routes around obstacles. A drone running SpatialGen VPS then flies the chosen route using only its camera, with no GPS and no new hardware. Personnel review every path.
Does 3D terrain mapping with SpatialGen require new hardware?
No. SpatialGen VPS works with any drone camera and needs no new hardware on the aircraft. SpatialGen generates the 3D map on the edge, in real-time, with minimal compute: one NVIDIA Jetson Orin or any edge computer. That keeps the workflow usable in the field, not only in a data center.
Sources
- Satellogic, SpatialGen technology partner for satellite imagery
- US Army, One World Terrain generation time (2019)
- 3D Tiles specification